Prof. Dr. ÖZLEM BARAN ACIMERT

Yayın Ağı

Makaleler 31

1. Investigation of the Structural, Mechanical, Tribological and Electrochemical Properties of B4C Films Deposited by Different Techniques

Keleş-Dayauç A., BARAN ACIMERT Ö.

Journal of Materials Engineering and Performance , cilt.34, sa.13, ss.13751-13760, 2025 (SCI-Expanded, Scopus)

2. Development of a novel hydrothermal process for surface modification of galvanized steel, characterization, and photocatalytic application

Zorlu R., ÖZDOKUR K. V., BARAN ACIMERT Ö., Demir Z., Çağlar B., ÇIRAK Ç., et al.

Surfaces and Interfaces , cilt.51, 2024 (SCI-Expanded, Scopus)

3. Structural, Mechanical and Tribological Properties of Hydroxiapatite Reinforced Ti13Nb13Zr/HA Composite Produced by Friction Stir Process (FSP)

BARAN ACIMERT Ö., Okur B. B., Dayauç A. K., KÜÇÜKÖMEROĞLU T., Kanca Y.

Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science , cilt.55, sa.4, ss.2739-2749, 2024 (SCI-Expanded, Scopus)

4. Ta Effect on Structural, Mechanical and Tribological Properties of TiCN Coatings

Baran Acımert Ö., Çavlan S., Keleş Dayauç A., Hopkins L.

Journal of Materials Engineering and Performance , cilt.31, sa.11, ss.9039-9049, 2022 (SCI-Expanded, Scopus)

5. GLC effect on mechanical and electrochemical properties of MoS2 films

Dayauç A. K., Acımert Ö. B.

International Journal of Surface Science and Engineering , cilt.16, sa.1, ss.39-51, 2022 (SCI-Expanded, Scopus)

6. The mechanical, corrosion and tribological properties of Al2O3 films grown by anodisation and MAO

Dayauc A. K., Acimert Ö., Şenocak T. Ç.

International Journal of Surface Science and Engineering , cilt.16, sa.2, ss.105-123, 2022 (SCI-Expanded, Scopus)

7. Corrosion and tribocorrosion properties of duplex surface treatments consisting of plasma nitriding and DLC coating

Kovacı H., Bozkurt Y. B., Yetim A., Baran Ö., Çelik A.

Tribology International , cilt.156, 2021 (SCI-Expanded, Scopus)

8. Determining Optimum Parameters for Adhesion Properties of Ta-DLC Films Using Taguchi Experimental Design

Keleş A., Baran Ö., Urvasızoğlu G., Ataol M., Totik Y., Ertaş Ü., et al.

Brillant Engineering , cilt.1, sa.1, ss.1-6, 2020 (Hakemli Dergi)

9. The friction and wear performance of DLC coatings deposited on plasma nitrided AISI 4140 steel by magnetron sputtering under air and vacuum conditions

Kovacı H., Baran Ö., Yetim A. F., Bozkurt Y. B., Kara L., Çelik A.

SURFACE & COATINGS TECHNOLOGY , cilt.349, ss.969-979, 2018 (SCI-Expanded, Scopus)

10. Processing and Wear Behaviour of 3D Printed PLA Reinforced with Biogenic Carbon

Ertane E., Dorner-Reisel A., BARAN Ö., Welzel T., Matner V., Svoboda S.

Advances in Tribology , cilt.4, ss.1-11, 2018 (Scopus)

11. Tribological behavior of DLC films and duplex ceramic coatings under different sliding conditions

Kovacı H., Yetım A. F., Baran Ö., Çelik A.

CERAMICS INTERNATIONAL , cilt.44, sa.6, ss.7151-7158, 2018 (SCI-Expanded, Scopus)

12. Investigation of high temperature wear resistance of TiCrAlCN/TiAlN multilayer coatings over M2 steel

Sukuroglu E. E., Baran Ö., Totık Y., Efeoglu I.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY , cilt.32, sa.13, ss.1428-1436, 2018 (SCI-Expanded, Scopus)

13. The mechanical and tribological properties of Ti [Nb, V] N films on the Al-2024 alloy

Baran Ö., Keleş A., Cicek H., Totik Y., Efeoğlu İ.

SURFACE & COATINGS TECHNOLOGY , cilt.332, ss.312-318, 2017 (SCI-Expanded, Scopus)

14. A comparative study of fatigue properties of TiVN and TiNbN thin films deposited on different substrates

Cicek H., Baran Ö., Keleş A., Totik Y., Efeoğlu İ.

SURFACE & COATINGS TECHNOLOGY , cilt.332, ss.296-303, 2017 (SCI-Expanded, Scopus)

15. Determining the critical loads of V and Nb doped ternary TiN-based coatings deposited using CFUBMS on steels

Keleş A., Cicek H., Baran Ö., Totik Y., Efeoğlu İ.

SURFACE & COATINGS TECHNOLOGY , cilt.332, ss.168-173, 2017 (SCI-Expanded, Scopus)

16. Magnetron Sıçratma Yöntemiyle Kaplanmış TiNbN ve TiVN Filmlerin Mekanik ve Tribolojik Özelliklerinin İncelenmesi

BARAN Ö.

Gümüşhane Üniversitesi Fen Bilimleri Enstitüsü Dergisi , cilt.7, sa.2, ss.181-191, 2017 (TRDizin)

17. Adhesion and fatigue resistance of Ta-doped MoS2 composite coatings deposited with pulsed-DC magnetron sputtering

Baran Ö.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY , cilt.31, sa.11, ss.1181-1195, 2017 (SCI-Expanded, Scopus)

18. Influence of plasma nitriding treatment on the adhesion of DLC films deposited on AISI 4140 steel by PVD magnetron sputtering

Kovacı H., Baran Ö., Bayrak Ö., Yetim A. F., Çelik A.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY , cilt.31, sa.18, ss.2015-2027, 2017 (SCI-Expanded, Scopus)

19. Fatigue crack growth behavior of DLC coated AISI 4140 steel under constant and variable amplitude loading conditions

Kovacı H., Yetim A. F., Baran Ö., Çelik A.

SURFACE & COATINGS TECHNOLOGY , cilt.304, ss.316-324, 2016 (SCI-Expanded, Scopus)

20. Fatigue crack growth analysis of plasma nitrided AISI 4140 low-alloy steel: Part 2-Variable amplitude loading and load interactions

Kovacı H., Yetim A. F., Baran Ö., Çelik A.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , cilt.672, ss.265-275, 2016 (SCI-Expanded, Scopus)

21. Fatigue crack growth analysis of plasma nitrided AISI 4140 low-alloy steel: Part 1-constant amplitude loading

Kovacı H., Yetim A. F., Baran Ö., Çelik A.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , cilt.672, ss.257-264, 2016 (SCI-Expanded, Scopus)

22. Mechanical and Tribological Properties of TiTaBN Graded-Composite Coatings Deposited Using the CFUBMS Technique

BARAN Ö., Efoglu I., Prakash B.

TRIBOLOGY TRANSACTIONS , cilt.59, sa.6, ss.1089-1097, 2016 (SCI-Expanded, Scopus)

23. The investigation of adhesion and fatigue properties of TiN/TaN multilayer coatings

Baran Ö., Sukuroglu E. E., Efeoğlu İ., Totik Y.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY , cilt.30, sa.20, ss.2188-2200, 2016 (SCI-Expanded, Scopus)

24. Adhesion and tribological properties of TiTaBN coatings with a graded interlayer deposited by pulsed DC biased and continuous dc biased magnetron sputtering

Baran Ö., Efeoğlu İ., Hardell J., Prakash B.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY , cilt.29, sa.18, ss.2006-2019, 2015 (SCI-Expanded, Scopus)

25. Investigation of the friction and wear properties of Ti/TiB2/MOS2 graded-composite coatings deposited by CFUBMS under air and vacuum conditions

Baran Ö., Bidev F., Cicek H., Kara L., Efeoğlu İ., Küçükömeroğlu T.

SURFACE & COATINGS TECHNOLOGY , cilt.260, ss.310-315, 2014 (SCI-Expanded, Scopus)

26. The effect of nitrogen flow rate on TiBN coatings deposited on cold work tool steel

Cicek H., Baran Ö., Demirci E. E., Tahmasebian M., Totik Y., Efeoğlu İ.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY , cilt.28, sa.12, ss.1140-1148, 2014 (SCI-Expanded, Scopus)

27. Microstructure, Mechanical, and Scratch Resistance Properties of TiAlCrNbN-Graded Composite Coating Deposited on AISI H13 Steel Substrate with Pulsed DC Closed Field Unbalanced Magnetron Sputtering Method

Kara L., Küçükömeroğlu T., Baran Ö., Efeoğlu İ., Yamamoto K.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE , sa.4, ss.2123-2131, 2014 (SCI-Expanded, Scopus)

28. Adhesion and fatigue properties of Ti/TiB2/MoS2 graded-composite coatings deposited by closed-field unbalanced magnetron sputtering

Bidev F., Baran Ö., Arslan E., Totik Y., Efeoğlu İ.

SURFACE & COATINGS TECHNOLOGY , cilt.215, ss.266-271, 2013 (SCI-Expanded, Scopus)

29. Investigation of wear, corrosion and tribocorrosion properties of AZ91 Mg alloy coated by micro arc oxidation process in the different electrolyte solutions

Demirci E. E., Arslan E., Ezirmik K. V., Baran Ö., Totik Y., Efeoğlu İ.

THIN SOLID FILMS , cilt.528, ss.116-122, 2013 (SCI-Expanded, Scopus)

30. Tribological characteristics of MoS2-Nb solid lubricant film in different tribo-test conditions

Efeoğlu İ., Baran O., Yetim F., Altintas S.

SURFACE & COATINGS TECHNOLOGY , cilt.203, ss.766-770, 2008 (SCI-Expanded, Scopus)

31. Evaluation of adhesion and fatigue of MoS2-Nb solid-lubricant films deposited by pulsed-dc magnetron sputtering

Arslan E., Baran O., Efeoğlu İ., Totik Y.

SURFACE & COATINGS TECHNOLOGY , cilt.202, sa.11, ss.2344-2348, 2008 (SCI-Expanded, Scopus)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 55

1. SÜRTÜNME KARIŞTIRMA PROSESİ (SKP) UYGULANARAK ELDE EDİLEN TAKVİYESİZ Ti13Nb13Zr ALAŞIMI VE HİDROKSİAPATİT TAKVİYELİ Ti13Nb13Zr/HA KOMPOZİTİN YAPISAL VE MEKANİK ÖZELLİKLERİ

OKUR B. B., BARAN ACIMERT Ö., KELEŞ DAYAUÇ A., KÜÇÜKÖMEROĞLU T.

SOCRATES 6TH International Conference on Engineering, Health and Applied Sciences, Rome, İtalya, 13 Aralık 2022, (Tam Metin Bildiri)

2. THE ELECTROCHEMICAL PROPERTIES OF ANODIZED LIGHT ALLOYS

Keleş Dayauç A., Hopkıns L., Avcıoğlu E., Baran Acımert Ö.

INTERNATIONAL CONFERENCE ON ENGINEERING, NATURAL AND APPLIED SCIENCE 2021 (ICENAS’21), 24 Kasım 2021 - 26 Ocak 2022, ss.12, (Tam Metin Bildiri)

3. Corrosion Resistance of Anodized Aluminum Alloys

Baran Acımert Ö., Hopkıns L., Keleş Dayauç A., Aavcıoğlu E.

International Conference on Engineering Technologies (ICENTE'2021), Konya, Türkiye, 18 - 20 Kasım 2021, ss.335-337, (Tam Metin Bildiri)

4. Farklı Pasolarda Uygulanmış Sürtünme Karıştırma Prosesinin Al-5083’ün Tribolojik Özellikleri Üzerindeki Etkisinin İncelenmesi

Baran Acımert Ö., Saygın M., Keleş Dayauç A., Küçükömeroğlu T.

12. KAYNAK TEKNOLOJİSİ ULUSAL KONGRE VE SERGİSİ, Hatay, Türkiye, 13 - 15 Ekim 2021, (Yayınlanmadı)

5. The effect on mechanical and tribological properties of Al-5083 alloy of Al2O3 layer and Al2O3/h-BN composite layer produced by Friction Stir Process

Sert T. S., Baran Acımert Ö., Keleş Dayauç A., Sert Y., Küçükömeroğlu T.

6. Uluslararası Bilimsel Çalışmalar Kongresi, İstanbul, Türkiye, 26 - 28 Temmuz 2021, ss.678-685, (Tam Metin Bildiri)

6. TİCN KAPLAMALARIN YAPISAL VE MEKANİK ÖZELLİKLERİNE TA’NIN ETKİSİ

Çavlan S., BARAN Ö., Keleş A., Efeoğlu İ.

5. ULUSLARARASI MUHENDİSLİK MİMARLIK VE TASARIM KONGRESİ, İstanbul, Türkiye, 21 - 22 Aralık 2019, ss.100, (Tam Metin Bildiri)

7. The Influence of Different Surface Treatment on The Behaviour of Fatigue Crack Growth of AISI 4140 Under Two-stage Block Loading

Bozkurt Y. B., Kovacı H., Yetim A. F., Baran Ö., Çelik A.

5TH International Conference on Advances in Mechanical Engineering, İstanbul, Türkiye, 17 - 19 Aralık 2019, ss.2435, (Özet Bildiri)

8. The Structural Properties of Ta Doped DLC Films for the Dental Applications Using HiPIMS

Efeoğlu İ., BARAN Ö., Urvasızoğlu G., Keleş A., Atatol M., Totik Y., et al.

International Symposium on Advanced Materials and Nanotechnology (ISAMN 2019), Putrajaya, Malezya, 19 - 20 Ağustos 2019, ss.102-105, (Tam Metin Bildiri)

9. Determination of fracture micromechanics and fracture toughness of plasma nitrided, DLC coated and duplex surface treated AISI 4140 steel

KOVACI H., YETİM A. F., BARAN Ö., ÇELİK A.

27th Annual International Conference on Composites or Nano Engineering (ICCE-27), Granada, Nikaragua, 14 - 20 Temmuz 2019, (Özet Bildiri)

10. The Effect of Cu on Fatigue Properties of TiZrNbN Coatings

Aghdam H., Keleş A., BARAN Ö., TOTIK Y., EFOGLU I.

International Conference on Metallurgical Coatings and Thin Films, San Diego, Amerika Birleşik Devletleri, 23 - 27 Nisan 2018, ss.35, (Tam Metin Bildiri)

11. The Mechanical and Tribological Properties of TiZrNbN and TiZrNbN-Cu Films

EFOGLU I., Aghdam H., Keleş A., BARAN Ö., TOTIK Y.

International Conference on Metallurgical Coatings and Thin Films 2018 (ICMCTF'2018), San Diego, Amerika Birleşik Devletleri, 23 - 27 Nisan 2018, ss.32, (Özet Bildiri)

12. The Friction and Wear Performance of DLC Coatings Deposited on Plasma Nitrided AISI 4140 Steel by Magnetron Sputtering under Air and Vacuum Conditions

Kovacı H., BARAN Ö., YETIM A. F., Bozkurt Y., KARA L., ÇELİK A.

International Conference on Metallurgical Coatings and Thin Films 2018 (ICMCTF'2018), San Diego, Amerika Birleşik Devletleri, 23 - 27 Nisan 2018, ss.26, (Özet Bildiri)

13. The Friction and Wear Performance of DLC Coatings Deposited on Plasma Nitrided AISI 4140 Steel by Magnetron Sputtering under Air and Vacuum Conditions

Kovacı H., BARAN Ö., YETIM A. F., Bozkurt Y., KARA L., ÇELİK A.

International Conference on Metallurgical Coatings and Thin Films 2018 (ICMCTF'2018), San Diego, Amerika Birleşik Devletleri, 23 - 27 Nisan 2018, ss.26, (Özet Bildiri)

14. Al-5083 Alaşımının Mikroyapısal, Mekanik Ve Tribolojik Özelliklerinin Sürtünme Karıştırma Prosesi ile Iyileştirilmesi

BARAN Ö., Saygın M., KARA L., KUCUKOMEROGLU T.

1st International Symposium on Light Alloys and Composite Materials, Karabük, Türkiye, 22 - 24 Mart 2018, ss.189, (Özet Bildiri)

15. Magnetron Sıçratma Yöntemiyle D2 Soğuk İş Takım Çeliğine Kaplanmış TiN Kaplamaların Adezyon ve Tribolojik Özelliklerine Taban Malzeme Sıcaklığının Etkisi

BARAN Ö., Bilgin E., KARA L., Keleş A., EFOGLU I.

1st International Symposium on Light Alloys and Composite Materials, Karabük, Türkiye, 22 - 24 Mart 2018, ss.182, (Özet Bildiri)

16. The Effect of Friction Stir Processing Parameters on The Wear Properties of Al5083 Alloys

KUCUKOMEROGLU T., KARA L., BARAN Ö., SERT Y.

Balkan TRib'2017 (9th INTERNATIONAL CONFERENCE ON TRIBOLOGY), Nevşehir, Türkiye, 13 - 15 Eylül 2017, ss.40, (Özet Bildiri)

17. Investigation of the friction and wear behavior of DLC films and duplex plasma nitriding/DLC coatings under different sliding conditions

Kovacı H., YETIM A. F., BARAN Ö., ÇELİK A.

ICCS 20 (20 th International Conference on Composite Structures), Paris, Fransa, 4 - 07 Eylül 2017, ss.77, (Özet Bildiri)

18. Determining of the Critical Loads of Transition Metal Nitrides on Steels

Keleş A., Çiçek H., BARAN Ö., Totik Y., Efeoğlu İ.

International conference on metallurgical coatings and thin films (ICMCTF 2017), San Diego, Amerika Birleşik Devletleri, 24 - 28 Nisan 2017, ss.38, (Özet Bildiri)

19. The Mechanical and Tribological Properties of Ti [Nb, V] N Films on the 2024 Al-alloy

BARAN Ö., Keleş A., Çiçek H., Totik Y., Efeoğlu İ.

International conference on metallurgical coatings and thin films (ICMCTF 2017), San Diego, Amerika Birleşik Devletleri, 24 - 28 Nisan 2017, ss.73-74, (Özet Bildiri)

20. A Comparative Study of Fatigue Properties of TiVN and TiNbN Thin Films Deposited On Different Substrates

Çiçek H., BARAN Ö., Keleş A., Totik Y., Efeoğlu İ.

International conference on metallurgical coatings and thin films (ICMCTF 2017), San Diego, Amerika Birleşik Devletleri, 24 - 28 Nisan 2017, ss.73, (Özet Bildiri)

21. Comparing of Adhesion Properties of TiNbVN Coatings Deposited on Different Substrates

Efeoğlu İ., Totik Y., BARAN Ö., Çiçek H., Keleş A.

International conference on metallurgical coatings and thin films (ICMCTF 2017), San Diego, Amerika Birleşik Devletleri, 24 - 28 Nisan 2017, ss.120, (Özet Bildiri)

22. The Effect of Deposition Parameters on the Tribological Properties of TiAlCrNbN Coatings

KUCUKOMEROGLU T., BARAN Ö., EFEOGLU I., KARA L.

EUROMAT 2015, Warsaw, Polonya, 20 - 24 Eylül 2015, ss.1, (Özet Bildiri)

23. The Friction and Wear Properties at Room Temperature and Vacuum Atmosphere of Ti/TiB2/MoS2 Graded-Composite Coatings Deposited by CFUBMS

BARAN Ö., BIDEV F., Çiçek H., KARA L., Efeoğlu İ., KUCUKOMEROGLU T.

International Conference on Metallurgical Coatings&Thin Films, 41th ICMCTF, ICMCTF 2014, San Diego, Amerika Birleşik Devletleri, 28 Nisan - 02 Mayıs 2014, ss.116, (Özet Bildiri)

24. The Effect of Deposition Parameters on the Tribological Properties of TiAlCrNbN Thin Films

KARA L., BARAN Ö., KUCUKOMEROGLU T., Efeoğlu İ.

ICMCTF 2014, San Diego, Amerika Birleşik Devletleri, 28 Nisan - 02 Mayıs 2014, ss.118, (Özet Bildiri)

25. Structural, Mechanical and Tribological Properties of VN Thin Films Fabricated by PVD

Aghdam H., Efeoğlu İ., EZIRMIK K. V., Çiçek H., TAHMASEBIAN MYANDOAB M., BARAN Ö.

International Conference on Metallurgical Coatings&Thin Films, 41th ICMCTF, ICMCTF 2014, San Diego, Amerika Birleşik Devletleri, 28 Nisan - 02 Mayıs 2014, ss.33, (Özet Bildiri)

26. The Effect of Pulse and Bias DC Voltage on Crystallization of TiNi Shape Memory Thin Films Deposited by Unbalanced Magnetron Sputtering

Çiçek H., Efeoğlu İ., BARAN Ö., Totik Y.

International Conference on Metallurgical Coatings&Thin Films, 41th ICMCTF, ICMCTF 2014, San Diego, Amerika Birleşik Devletleri, 28 Nisan - 02 Mayıs 2014, ss.33-34, (Özet Bildiri)

27. Investigation of Adhesion and Corrosion Properties of CrAlYN/CrY Multilayer Coatings Deposited by Unbalanced Magnetron Sputtering

TAHMASEBIAN MYANDOAB M., Efeoğlu İ., EZIRMIK K. V., ARSLAN E., Totik Y., DEMIRCI E. E., et al.

International Conference on Metallurgical Coatings&Thin Films, 41th ICMCTF, ICMCTF 2014, San Diego, Amerika Birleşik Devletleri, 28 Nisan - 02 Mayıs 2014, ss.94, (Özet Bildiri)

28. The Investigation of the Adhesion,Wear and Friction Properties of TiN/TaN Multilayer Coatings

BARAN Ö., DEMIRCI E. E., Efeoğlu İ., Totik Y.

International Conference on Metallurgical Coatings&Thin Films, 40th ICMCTF, ICMCTF 2013, San Diego, Amerika Birleşik Devletleri, 28 Nisan - 03 Mayıs 2013, ss.97, (Özet Bildiri)

29. High Temperature Wear Resistance of TiCrAlCN/TiAlN Multilayer PVD Coatings on M2 High Speed Steel

Efeoğlu İ., DEMIRCI E. E., BARAN Ö., Totik Y.

International Conference on Metallurgical Coatings&Thin Films, 40th ICMCTF, ICMCTF 2013, San Diego, Amerika Birleşik Devletleri, 28 Nisan - 03 Mayıs 2013, ss.4, (Özet Bildiri)

30. Study of Structural and Mechanical Properties of CrAlYN/CrY Multilayer Thin Film Deposited on M2 Steel

TAHMASEBIAN MYANDOAB M., Efeoğlu İ., EZIRMIK K. V., DEMIRCI E. E., BARAN Ö., Totik Y.

International Conference on Metallurgical Coatings&Thin Films, 40th ICMCTF, ICMCTF 2013, San Diego, Amerika Birleşik Devletleri, 28 Nisan - 03 Mayıs 2013, ss.49, (Özet Bildiri)

31. Investigation of Corrosion Properties in TiAlN/TiCrN Multilayer Coatings Deposited by CFUBMS

DEMIRCI E. E., BARAN Ö., Totik Y., Efeoğlu İ., TAHMASEBIAN MYANDOAB M.

International Conference on Metallurgical Coatings&Thin Films, 40th ICMCTF, ICMCTF 2013, San Diego, Amerika Birleşik Devletleri, 28 Nisan - 03 Mayıs 2013, ss.88, (Özet Bildiri)

32. Tribological Properties of TiN/TaN and TiN/TaN Doped CrY Multilayer Coatings at High Temperature

Efeoğlu İ., BARAN Ö., DEMIRCI E. E., Totik Y.

International Conference on Metallurgical Coatings&Thin Films, 40th ICMCTF, ICMCTF 2013, San Diego, Amerika Birleşik Devletleri, 28 Nisan - 03 Mayıs 2013, ss.89, (Özet Bildiri)

33. NİTRÜR ESASLI ÇOK-TABAKALI KOMPOZİT İNCE FİLM SENTEZLENMESİ VE ADEZYON ÖZELLİKLERİNİN ARAŞTIRILMASI

Efeoğlu İ., Totik Y., BARAN Ö., DEMIRCI E. E.

SAVTEK2012, Savunma Teknolojileri kongresi, Ankara, Türkiye, 20 - 23 Haziran 2012, (Tam Metin Bildiri)

34. Evaluation of Adhesion of TiAlN/CrN Multilayer Coatings Deposited by CFUBMS

Çiçek H., Laloğlu Ç., BARAN Ö., DEMIRCI E. E., EZIRMIK K. V., Efeoğlu İ.

International Conference on Metallurgical Coatings&Thin Films, 39th ICMCTF, ICMCTF 2012, San Diego, Amerika Birleşik Devletleri, 23 - 27 Nisan 2012, ss.113, (Özet Bildiri)

35. Structural, Mechanical and Tribological Properties of TiTaBN Composite-Graded Coatings Deposited by CFUBMS Technique

BARAN Ö., Efeoğlu İ., Prakash B.

International Conference on Metallurgical Coatings&Thin Films, 39th ICMCTF, ICMCTF 2012, San Diego, Amerika Birleşik Devletleri, 23 - 27 Nisan 2012, ss.99, (Özet Bildiri)

36. Adhesion and fatigue properties of TiB2-MoS2 composite coatings deposited by closed-field unbalanced magnetron sputtering

BIDEV F., BARAN Ö., Aslan E., Totik Y., Efeoğlu İ.

International Conference on Metallurgical Coatings&Thin Films, 39th ICMCTF, ICMCTF 2012, San Diego, Amerika Birleşik Devletleri, 23 - 27 Nisan 2012, ss.78, (Özet Bildiri)

37. Investigation of Wear, Corrosion and Tribocorrosion Properties of AZ91 Mg Alloy Coated by Micro arc Oxidation Process in the Different Electrolyte Solution

DEMIRCI E. E., ARSLAN E., EZIRMIK K. V., BARAN Ö., Totik Y., Efeoğlu İ.

International Conference on Metallurgical Coatings&Thin Films, 39th ICMCTF, ICMCTF 2012, San Diego, Amerika Birleşik Devletleri, 23 - 27 Nisan 2012, ss.112, (Özet Bildiri)

38. Investigation of structural,mechanical and tribological properties of TiAlN/CrN multilayer films deposited by CFUBMS technique

Laloğlu Ç., BARAN Ö., Totik Y., Efeoğlu İ.

International Conference on Metallurgical Coatings&Thin Films, 39th ICMCTF, ICMCTF 2012, San Diego, Amerika Birleşik Devletleri, 23 - 27 Nisan 2012, ss.63, (Özet Bildiri)

39. İnsan vücudunda kullanılan farklı implantlara uygulanan biyomekanik testler ve ülkemizin biyomekanik test ihtiyacına genel bir bakış

Kovacı H., BAYRAK Ö., YETIM F., Hacısalihoğlu İ., Vangölü Y., ALBAYRAK Ç., et al.

IV. Ulusal Tıbbi Cihazlar İmalat Sanayi Kongre ve Sergisi,TİSKON 2011, Samsun, Türkiye, 23 - 24 Eylül 2011, ss.39-46, (Tam Metin Bildiri)

40. The Investigation of Adhesion Properties of Ti6Al4V Coated by MAO Treatment At The Different Frequencies

DEMIRCI E. E., BARAN Ö., Aslan E., Totik Y., Efeoğlu İ.

1st International Surface Treatment Symposium, İstanbul, Türkiye, 15 - 18 Haziran 2011, ss.45, (Özet Bildiri)

41. Research on Tribological Properties of CrN/AlN Multilayer Coatings At The Different Test Conditions

AKSAKALLI A. K., BARAN Ö., Aslan E., Totik Y., Efeoğlu İ.

1st International Surface Treatment Symposium, İstanbul, Türkiye, 15 - 18 Haziran 2011, ss.46, (Özet Bildiri)

42. Phase Transformation of MoS2-Nb Composite Coated Films at the High Temperatures

Efeoğlu İ., ALTINTAS S., BARAN Ö., Uğur D.

International Conference on Metallurgical Coatings&Thin Films, 38th ICMCTF, ICMCTF 2011, San Diego, Amerika Birleşik Devletleri, 2 - 06 Mayıs 2011, ss.89, (Özet Bildiri)

43. The Tribocorrosion Behavior of CP-Titanium by Micro Arc Oxidation at Different Frequencies

DEMIRCI E. E., ARSLAN E., TOTIK Y., BARAN Ö., Efeoğlu İ.

International Conference on Metallurgical Coatings&Thin Films, 38th ICMCTF, ICMCTF 2011, San Diego, Amerika Birleşik Devletleri, 2 - 06 Mayıs 2011, ss.108, (Özet Bildiri)

44. Çeşitli Oksidasyon İşlemleriyle Kaplanan Tİ6AL4V un Yapay Vücut Sıvısı İçinde SBF Sürtünme Ve Aşınma Özelliklerinin İncelenmesi

BARAN Ö., ALBAYRAK Ç., ALSARAN A., ÇELİK A., EFEOĞLU İ.

V.ULUSLARARASI KATILIMLI ULUSAL BİYOMEKANİK KONGRESİ, İzmir, Türkiye, 23 - 25 Eylül 2010, (Özet Bildiri) Sürdürülebilir Kalkınma

45. Çeşitli Oksidasyon İşlemleriyle Kaplanan Tİ6AL4V’un Yapay Vücut Sıvısı İçinde(SBF) Sürtünme Ve Aşınma Özellikleri

BARAN Ö., ALBAYRAK Ç., Alsaran A., Çelik A., Efeoğlu İ.

V.ULUSLARARASI KATILIMLI ULUSAL BİYOMEKANİK KONGRESİ, İzmir, Türkiye, 23 - 25 Eylül 2010, ss.57, (Özet Bildiri) Sürdürülebilir Kalkınma

46. Tribological Properties in Different Test Conditions of Thin Films TiTaBN Deposited by CFUBMS

BARAN Ö., Efeoğlu İ., Prakash B.

International Conference on Metallurgical Coatings&Thin Films, 37th ICMCTF, ICMCTF 2010, San Diego, Amerika Birleşik Devletleri, 26 - 30 Nisan 2010, ss.116, (Özet Bildiri)

47. Multi-Pass Scratch Test of DLC Coatings Deposited by CFUBMS on Anodized-CP-Ti at the Different Temperatures and Potentials

ALBAYRAK Ç., BARAN Ö., Alsaran A., Efeoğlu I., Çelik A.

International Conference on Metallurgical Coatings&Thin Films, 37th ICMCTF, ICMCTF 2010, San Diego, Amerika Birleşik Devletleri, 26 - 30 Nisan 2010, ss.76, (Özet Bildiri)

48. The Investigation of Scratch Behaviour of Composed Structured TiBN Hard Films Deposited On Cold Work Tool Steel at the Different Nitrogen Rates

Çiçek H., BARAN Ö., Totik Y., Aslan E., Efeoğlu İ.

International Conference on Metallurgical Coatings&Thin Films, 37th ICMCTF, ICMCTF 2010, San Diego, Amerika Birleşik Devletleri, 26 - 30 Nisan 2010, ss.98, (Özet Bildiri)

Kitaplar 1

1. METALİK MALZEMELERİN YÜZEYLERİNE YAPILAN İŞLEMLERDE İSG

BARAN Ö.

Elektrik ve Metal İşlerinde İSG, Efeoğlu, İ., Editör, Atatürk Üniversitesi Açıköğretim Fakültesi, Erzurum, ss.50, 2019

Metrikler

Yayın

Yayın (WoS)

Yayın (Scopus)

Atıf (WoS)

196

H-İndeks (WoS)

Atıf (Scopus)

607

H-İndeks (Scopus)

Atıf (Sobiad)

H-İndeks (Sobiad)

Proje

Tez Danışmanlığı

Açık Erişim

BM Sürdürülebilir Kalkınma Amaçları

Yayınlar & Eserler

Yayın

Yayın (WoS)

Yayın (Scopus)

Atıf (WoS)

H-İndeks (WoS)

Atıf (Scopus)

H-İndeks (Scopus)

Atıf (Sobiad)

H-İndeks (Sobiad)

Proje

Tez Danışmanlığı

Açık Erişim