Yayınlar & Eserler

Yayın Ağı
Makaleler 8
Tümü (8)
SCI-E, SSCI, AHCI (6)
SCI-E, SSCI, AHCI, ESCI (6)
Scopus (7)
TRDizin (1)

1. Impact of screw arm angle, material property, and applied force on the behavior of maxillary expander

ÇAM S., KARSLI KAHRAMANZADE N., KAHRAMANZADE H.
Challenge Journal of Structural Mechanics , cilt.11, sa.3, ss.128-136, 2025 (TRDizin) identifier

2. Evaluation of the mechanical properties and cell cultural behavior of diamond lattice scaffolds with different porosities

KAHRAMANZADE H., ÇELİK UZUNER S., ÇAM S., UZUNER U.
Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine , cilt.239, sa.4, ss.388-397, 2025 (SCI-Expanded, Scopus) identifier identifier

3. An innovative method for determining the stress concentration factor of interference fit joints and additional design recommendations

ÇAM S.
Mechanics Based Design of Structures and Machines , cilt.53, sa.10, ss.7012-7032, 2025 (SCI-Expanded, Scopus) identifier

4. An investigation on crashworthiness performance of adhesive bonding in automobile hybrid front bumper system subjected to high-speed impact

ÇAM S., SOFUOĞLU H.
International Journal of Impact Engineering , cilt.173, 2023 (SCI-Expanded, Scopus) identifier identifier

5. Coupled effect of thickness optimization and plastic forming history on crashworthiness performance of thin-walled square tube

SOFUOĞLU H., ÇAM S.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , cilt.117, sa.9-10, ss.2935-2948, 2021 (SCI-Expanded, Scopus) Creative Commons License identifier identifier

6. The effect of opposing notch geometry on the tensile strength of adhesively bonded single-lap joints

ÇAM S., ÖZEL A.
ENGINEERING COMPUTATIONS , cilt.37, sa.8, ss.2895-2911, 2020 (SCI-Expanded, Scopus) identifier identifier

7. Experimental and numerical analysis of epoxy based adhesive failure on mono- and bi-material single lap joints under different displacement rates

Kahramanzade H., ÇAM S., ORHAN O., ÖZEL A.
Fracture and Structural Integrity , sa.52, ss.9-24, 2020 (Scopus)

8. The effects of graphene nanostructure reinforcement on the adhesive method and the graphene reinforcement ratio on the failure load in adhesively bonded joints

Gültekin K., Akpinar S., GÜRSES A., Eroglu Z., ÇAM S., AKBULUT H., et al.
Composites Part B: Engineering , cilt.98, ss.362-369, 2016 (SCI-Expanded, Scopus) identifier identifier
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 8

1. The Effect of Different Screw Arm Angles on Maxillary Expansion Screws: A Finite Element Analysis

Karslı N., Çam S.
ICHEAS 7th Internetional Conference on Health, Engineering and Applied Sciences, Sarajevo, Bosna-Hersek, 28 - 30 Haziran 2024, ss.116, (Özet Bildiri)

2. MECHANICAL AND THERMAL ANALYSIS OF THE PRODUCTION OF AN INDUSTRIAL PRODUCT USING THE PLASTIC INJECTION METHOD

CANYURT S., ÇAM S., KALKAN O.
1. BİLSEL INTERNATIONAL KORYKOS SCIENTIFIC RESEARCHES AND INNOVATION CONGRESS, 28 Ocak 2024, (Özet Bildiri)

3. An Evaluation of the Impact Performance of the Deep-Drawn Thin-Walled Tubes Considering Different Cross-Sections

Çam S., Sofuoğlu H.
7. Uluslararası Erciyes Bilimsel Araştırmalar Kongresi, Kayseri, Türkiye, 9 - 10 Mart 2022, ss.344-351, (Tam Metin Bildiri)

4. EVALUATION OF THE FAILURE LOAD OF THE SINGLE-LAP JOINT ESTABLISHED BY USING NANOPARTICLE REINFORCED ADHESIVE

KAHRAMANZADE H., ÇAM S., ORHAN O., ÖZEL A.
2. ULUSLARARASI 19 MAYIS YENİLİKÇİ BİLİMSEL YAKLAŞIMLAR KONGRESİ, 27 - 29 Aralık 2019, (Özet Bildiri)

5. Nanopartikül Katkısının Tek Tesirli Bindirme Bağlantısının Dayanımına Olan Etkisinin İncelenmesi

Kahramanzade H., ÇAM S., ORHAN O., ÖZEL A.
2. Uluslararası 19 Mayıs Yenilikçi Bilimsel Yaklaşımlar Kongresi, Samsun, Türkiye, 27 - 29 Aralık 2019, ss.339, (Özet Bildiri)

6. Analysis of dental implant according to number of components in terms of applicability and mechanical behavior

GHAHRAMANZADEHASL H., ÇAM S., ORHAN O., BAYRAK Ö.
International Conference on Advances is Mechanical and Mechatronics Engineering, Ankara, Türkiye, 8 Kasım - 09 Aralık 2018, (Tam Metin Bildiri)

7. AA 6013 Alaşımının Halka Basma Testi ve Sonlu Elemanlar Analizi

ÇAM S., SOFUOĞLU H., CORA Ö. N.
20. ULUSAL MEKANİK KONGRESİ, Bursa, Türkiye, 5 - 09 Eylül 2017, (Tam Metin Bildiri)

8. Nano adhesively bonded strap joints subjected to tensile loading

ÇAM S., AKPINAR S., AKBULUT H., GÜLTEKİN K., ÖZEL A.
ICCS19, Porto, Portekiz, 5 - 09 Eylül 2016, (Özet Bildiri)
Metrikler

Yayın

16

Yayın (WoS)

6

Yayın (Scopus)

7

Atıf (WoS)

26

Atıf (Scopus)

80

H-İndeks (Scopus)

3

Atıf (Sobiad)

14

H-İndeks (Sobiad)

1

Proje

4

Açık Erişim

1