Yayınlar & Eserler

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Electrochemically structured tantalum surfaces via anodization for core-shell nanostructures: Optimization and characterization of Zn-ZnO nanoparticle deposition using magnetron sputtering

KARA L., Calderon S., Carvalho S.
Journal of Vacuum Science and Technology A: Vacuum, Surfaces and Films , cilt.42, sa.3, 2024 (SCI-Expanded) identifier

The effect of FSP on the friction and wear behaviour of Al5083 under normal atmosphere and vacuum conditions

KARA L.
Materials Science and Technology (United Kingdom) , cilt.39, sa.7, ss.876-899, 2023 (SCI-Expanded) identifier identifier

Nano-Hydroxyapatite Airborne-Particle Abrasion System as an Alternative Surface Treatment Method on Intraorally Contaminated Titanium Discs

Gumus K. C., USTAOĞLU G., KARA L., ERCAN E., ALBAYRAK Ö., TUNALI M.
INTERNATIONAL JOURNAL OF PERIODONTICS & RESTORATIVE DENTISTRY , cilt.40, sa.4, 2020 (SCI-Expanded) identifier identifier identifier

THE EFFECT OF TiN, TiAlN, CrAlN, AND TiAlN/TiSiN COATINGS ON THE WEAR PROPERTIES OF AISI H13 STEEL AT ROOM TEMPERATURE

KARA L., Asl H. G., Karadayi O.
SURFACE REVIEW AND LETTERS , cilt.26, sa.9, 2019 (SCI-Expanded) identifier identifier

Friction and Wear Behaviors of TiN Coatings under Dry and Vacuum Conditions

KARA L., Ozkan D., Yagci M. B., Sulukan E., SERT Y., Sert T. S.
TRIBOLOGY TRANSACTIONS , cilt.62, sa.3, ss.362-373, 2019 (SCI-Expanded) identifier identifier

Tribological Behavior of TiAlN, AlTiN, and AlCrN Coatings at Boundary Lubricating Condition

Ozkan D., ERARSLAN Y., Sulukan E., KARA L., Yilmaz M. A., Yagci M. B.
TRIBOLOGY LETTERS , cilt.66, sa.4, 2018 (SCI-Expanded) identifier identifier

The friction and wear performance of DLC coatings deposited on plasma nitrided AISI 4140 steel by magnetron sputtering under air and vacuum conditions

Kovacı H., Baran Ö., Yetim A. F., Bozkurt Y. B., Kara L., Çelik A.
SURFACE & COATINGS TECHNOLOGY , cilt.349, ss.969-979, 2018 (SCI-Expanded) identifier identifier

The influence of nitrogen implantation on tribological properties of AISI H11 steel

BUDZYNSKI P., Kara L., KÜÇÜKÖMEROĞLU T., KAMINSKI M.
VACUUM , cilt.122, ss.230-235, 2015 (SCI-Expanded) identifier identifier

The effect of Er,Cr:YSGG laser irradiation on titanium discs with microtextured surface morphology

Ercan E., Candirli C., Arin T., Kara L., Uysal C.
LASERS IN MEDICAL SCIENCE , cilt.30, sa.1, ss.11-15, 2015 (SCI-Expanded) identifier identifier identifier

Investigation of the friction and wear properties of Ti/TiB2/MOS2 graded-composite coatings deposited by CFUBMS under air and vacuum conditions

Baran Ö., Bidev F., Cicek H., Kara L., Efeoğlu İ., Küçükömeroğlu T.
SURFACE & COATINGS TECHNOLOGY , cilt.260, ss.310-315, 2014 (SCI-Expanded) identifier identifier

Effects of Er,Cr:YSGG laser irradiation on the surface characteristics of titanium discs: An in vitro study

Ercan E., Arin T., Kara L., Candirli C., Uysal C.
LASERS IN MEDICAL SCIENCE , cilt.29, sa.3, ss.875-880, 2014 (SCI-Expanded) identifier identifier identifier

Microstructure, Mechanical, and Scratch Resistance Properties of TiAlCrNbN-Graded Composite Coating Deposited on AISI H13 Steel Substrate with Pulsed DC Closed Field Unbalanced Magnetron Sputtering Method

Kara L., Küçükömeroğlu T., Baran Ö., Efeoğlu İ., Yamamoto K.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE , sa.4, ss.2123-2131, 2014 (SCI-Expanded) identifier identifier

The friction and wear properties of CuZn39Pb3 alloys under atmospheric and vacuum conditions

KÜÇÜKÖMEROĞLU T., Kara L.
WEAR , cilt.309, ss.21-28, 2014 (SCI-Expanded) identifier identifier

Diğer Dergilerde Yayınlanan Makaleler

THE EFFECT OF “B” TARGET VOLTAGE ON WEAR PROPERTIES OF TiCrNb-hBN COATINGS

SERT Y., KÜÇÜKÖMEROĞLU T., KAHRAMANZADE H., KARA L.
Acta Mechanica et Automatica , cilt.17, sa.4, ss.575-580, 2023 (ESCI) Creative Commons License identifier

5 Farklı CAD / CAM Restoratif Malzemelerin Mekanik ve Aşınma Özelliklerinin İncelenmesi

KAHRAMANZADE H., SAĞSÖZ Ö., KARA L.
El-Cezeri Journal of Science and Engineering , cilt.7, sa.1, ss.57-66, 2020 (Scopus) Sürdürülebilir Kalkınma identifier

CrN Kaplanmış AISI 52100 Çeliğinin Atmosfer ve Vakum ortamlarında Aşınma Davranışının İncelenmesi

KARA L.
Bitlis Eren Üniversitesi Fen Bilimleri Dergisi , cilt.8, sa.1, ss.118-131, 2019 (Hakemli Dergi)

THE INVESTIGATION OF WEAR PROPERTIES OF TIN COATINGS ON THE H13 TOOL STEEL UNDER DIFFERENT DEPOSITION PARAMETERS

GHAHRAMANZADEH ASL H., KARA L., Sert Y., Sonsuz SERT T., KÜÇÜKÖMEROĞLU T.
e-Journal of New World Sciences Academy , cilt.13, sa.4, ss.316-323, 2018 (Hakemli Dergi)

Er,Cr:YSGG Laser as a surface detoxification method in enhancement of osseointegration

UYSAL C., ERCAN E., KARA L., ARIN T.
Aydın Dental Journal , cilt.3, sa.1, ss.1-10, 2017 (Hakemli Dergi)

Investigation of friction and wear behaviours of CuSn10 alloy in vacuum

Küçükömeroğlu T., Pürçek G., Saray O., KARA L.
journal of achievements in materials and manufacturing engineering , cilt.30, ss.172-176, 2008 (Scopus)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

Bias Gerilimi ve Nb Hedef Akımının TiAlCrNbN Kaplamaların Morfolojik, Yapısal ve Kimyasal Özelliklerine Etkisi

KARA L.
LATIN AMERICA 5th INTERNATIONAL CONFERENCE ON SCIENTIFIC RESEARCHES, Medlin, Kolombiya, 17 Şubat - 19 Mart 2023, ss.89-97

TRIBOLOGICAL BEHAVIOR OF TiAlN, AlTiN, AlCrN COATINGS UNDER DRY AND LUBRICATED CONDITIONS

ÖZKAN D., ERARSLAN Y., KARA L., YILMAZ M. A., YAĞCI M. B., SULUKAN E.
19th International Metallurgy and Materials Congress, 25 - 27 Ekim 2018

Mechanical, Structural and Tribological Properties of TiAlZrN Coated AISI H13 Steel

Sert Y., KARA L., Küçükömeroğlu T., Wfwoğlu İ.
19th International Metallurgy and Materials Congress, İstanbul, Türkiye, 25 - 27 Ekim 2018, ss.82

TRIBOLOGICAL BEHAVIOR OF TiB2 COATINGS UNDER VACUUM CONDITION

SERT T. S., KARA L., ÖZKAN D., KÜÇÜKÖMEROĞLU T., SERT Y.
3rd International Conference on Material Science and Technology in Cappadocia (IMSTEC’18), 17 - 19 Eylül 2018

COATING TEMPERATURE EFFECT ON TRIBLOGICAL PROPERTIES OF THE TiB2 THIN FILM COATINGS

DURUKAN A., SERT T. S., ÖZKAN D., KARA L.
3rd International Material Science and Technology in Cappadocia (IMSTEC’18), 17 - 19 Eylül 2018

WEAR AND FRICTION BEHAVIOR OF TIBN COATINGS UNDER DRY AND LUBRICATED CONDITIONS

ÖZKAN D., KARA L., SULUKAN E., KÜÇÜKÖMEROĞLU T., SERT Y., SERT T. S.
3rd International Conference on Material Science and Technology in Cappadocia (IMSTEC’18), Nevşehir, Türkiye, 17 - 19 Eylül 2018

Wettability of the intraorally contaminated titanium discs cleaning with different decontamination methods

GÜMÜŞ K. Ç., USTAOĞLU G., TUNALI M., ERCAN E., KARA L., ALBAYRAK Ö.
EAO- Avrupa Osseointegrasyon Derneği 27. Yıllık Kongresi, 11 - 13 Ekim 2018, cilt.29, ss.50

The Effect of Deposition Parameters on the Wear and Scratch Properties of TiAlZrN Coatings

SERT Y., KÜÇÜKÖMEROĞLU T., KARA L., EFEOĞLU İ.
International Science Applications of Thin Films, Conference Exhibition (SATF 2018), 17 - 21 Eylül 2018, cilt.1, ss.13-21

The Friction and Wear Performance of DLC Coatings Deposited on Plasma Nitrided AISI 4140 Steel by Magnetron Sputtering under Air and Vacuum Conditions

Kovacı H., BARAN Ö., YETIM A. F., Bozkurt Y., KARA L., ÇELİK A.
International Conference on Metallurgical Coatings and Thin Films 2018 (ICMCTF'2018), San Diego, Amerika Birleşik Devletleri, 23 - 27 Nisan 2018, ss.26

The Friction and Wear Performance of DLC Coatings Deposited on Plasma Nitrided AISI 4140 Steel by Magnetron Sputtering under Air and Vacuum Conditions

Kovacı H., BARAN Ö., YETIM A. F., Bozkurt Y., KARA L., ÇELİK A.
International Conference on Metallurgical Coatings and Thin Films 2018 (ICMCTF'2018), San Diego, Amerika Birleşik Devletleri, 23 - 27 Nisan 2018, ss.26

Magnetron Sıçratma Yöntemiyle D2 Soğuk İş Takım Çeliğine Kaplanmış TiN Kaplamaların Adezyon ve Tribolojik Özelliklerine Taban Malzeme Sıcaklığının Etkisi

BARAN Ö., Bilgin E., KARA L., Keleş A., EFOGLU I.
1st International Symposium on Light Alloys and Composite Materials, Karabük, Türkiye, 22 - 24 Mart 2018, ss.182

Al-5083 Alaşımının Mikroyapısal, Mekanik Ve Tribolojik Özelliklerinin Sürtünme Karıştırma Prosesi ile Iyileştirilmesi

BARAN Ö., Saygın M., KARA L., KUCUKOMEROGLU T.
1st International Symposium on Light Alloys and Composite Materials, Karabük, Türkiye, 22 - 24 Mart 2018, ss.189

Investigation of Wear Hardness Propperties of CAD7CAM Materials: A Pilot Study

KAHRAMANZADE H., SAĞSÖZ Ö., KARA L.
Turkish Society of Restorative Dentistry 21stInternational Scientific Congress, 1 - 03 Kasım 2017

The Wear Behaviour of 52100 Steel under Vacuum Environment

KARA L., KÜÇÜKÖMEROĞLU T., GHAHRAMANZADEH ASL H., SERT Y.
BalkanTRib’xx17 9’xxth International Conference on Tribology, 13 - 15 Eylül 2017

CAD/CAM Materyallerin Aşınma ve Sertlik Özelliklerinin İncelenmesi: Bir Pilot Çalışma

GHAHRAMANZADEH ASL H., SAĞSÖZ Ö., KARA L.
Restoratif Diş Hekimliği Derneği 21. Uluslararası Kongresi, Türkiye, 1 - 03 Aralık 2017 Sürdürülebilir Kalkınma

The Investigation of Wear Properties of TiN Coatings under Different Deposition Parameters

GHAHRAMANZADEH ASL H., SERT Y., KARA L., KÜÇÜKÖMEROĞLU T., SONSUZ SERT T.
ICADET’xx17, Bayburt, Türkiye, 21 - 23 Eylül 2017, cilt.19, ss.58-63

The Effect of Friction Stir Processing Parameters on The Wear Properties of Al5083 Alloys

KUCUKOMEROGLU T., KARA L., BARAN Ö., SERT Y.
Balkan TRib'2017 (9th INTERNATIONAL CONFERENCE ON TRIBOLOGY), Nevşehir, Türkiye, 13 - 15 Eylül 2017, ss.40

NAB Bronzunun Vakum Ortamındaki Sürtünme ve Aşınma Özelliklerinin İncelenmesi

KUCUKOMEROGLU T., KARA L.
15th International Materials Symposium (IMSP’2014), Denizli, Türkiye, 15 - 17 Ekim 2015, ss.114-120 Sürdürülebilir Kalkınma

The Effect of Deposition Parameters on the Tribological Properties of TiAlCrNbN Coatings

KUCUKOMEROGLU T., BARAN Ö., EFEOGLU I., KARA L.
EUROMAT 2015, Warsaw, Polonya, 20 - 24 Eylül 2015, ss.1

The Friction and Wear Properties at Room Temperature and Vacuum Atmosphere of Ti/TiB2/MoS2 Graded-Composite Coatings Deposited by CFUBMS

BARAN Ö., BIDEV F., Çiçek H., KARA L., Efeoğlu İ., KUCUKOMEROGLU T.
International Conference on Metallurgical Coatings&Thin Films, 41th ICMCTF, ICMCTF 2014, San Diego, Amerika Birleşik Devletleri, 28 Nisan - 02 Mayıs 2014, ss.116

The Effect of Deposition Parameters on the Tribological Properties of TiAlCrNbN Thin Films

KARA L., BARAN Ö., KUCUKOMEROGLU T., Efeoğlu İ.
ICMCTF 2014, San Diego, Amerika Birleşik Devletleri, 28 Nisan - 02 Mayıs 2014, ss.118

Effect of Deposition Parameters on Mechanical Properties of MoS2-Ti Coating

KARA L., KUCUKOMEROGLU T., EFEOGLU I., DANIŞMAN Ş., SAVAŞ S.
IMSP’2012, Denizli, Türkiye, 10 - 12 Ekim 2012, ss.96

The Structural Examination of Microstructure, Hardness, Tensile and Bending Tests of IF 7114 Steel Joined by Friction Stir Welding

KUCUKOMEROGLU T., Aktarer S., KARA L., Yılmaz H.
International Congress on Advances in Welding Science and Technology for Construction, Energy and Transportation Systems (AWST), Antalya, Türkiye, 24 - 25 Kasım 2011, ss.330-342

The effect of tool press force on the weldability of if steel by friction stir welding

AKTARER S. M., KÜÇÜKÖMEROĞLU T., KARA L.
New Materials and Its Technologies In Production Engineering, 12 Ekim 2011

The effect of tool press force on the weldability of if steel by friction stir welding New Materials and It Technologies In Production Engineering

KUCUKOMEROGLU T., Aktarer S., KARA L.
New Materials and Its Technologies in Production Engineering, Lublin, Polonya, 12 - 14 Mayıs 2011, ss.55-68

Investigation of wear surfaces that occurs in CuZn39Pb3 bearing alloy with scanning electron microscopy

Küçükömeroğlu T., KARA L.
19th National Electron Microscopy Conference (International Subscription),, Trabzon, Türkiye, 10 - 12 Haziran 2009, ss.232

Investigation of friction and wear behaviors of AlSi12 alloy in vacuum, 19. National Electron Microscopy Conference (International Subscription),

KARA L., KUCUKOMEROGLU T.
19th National Electron Microscopy Conference (International Subscription),, Trabzon, Türkiye, 10 - 12 Haziran 2009, ss.82

Metrikler

Yayın

46

Atıf (WoS)

65

H-İndeks (WoS)

5

Atıf (Scopus)

191

H-İndeks (Scopus)

9

Proje

4

Açık Erişim

1
BM Sürdürülebilir Kalkınma Amaçları