Prof. ADNAN ÖZEL

Publication Network

Published journal articles indexed by SCI, SSCI, and AHCI

Structural, thermal, and mechanical properties of silanized boron carbide doped epoxy nanocomposites

Gultekin K., UĞUZ G., TOPCU Y., ÖZEL A.

JOURNAL OF APPLIED POLYMER SCIENCE , vol.138, no.42, 2021 (SCI-Expanded)

Improvements of the structural, thermal, and mechanical properties of structural adhesive with functionalized boron nitride nanoparticles

Gultekin K., UĞUZ G., ÖZEL A.

JOURNAL OF APPLIED POLYMER SCIENCE , vol.138, no.21, 2021 (SCI-Expanded)

Homogenized pouch cell material modelling and a comparison study

ORHAN O., ÖZEL A.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH , vol.45, no.2, pp.2668-2679, 2021 (SCI-Expanded) Sustainable Development

The effect of opposing notch geometry on the tensile strength of adhesively bonded single-lap joints

ÇAM S., ÖZEL A.

ENGINEERING COMPUTATIONS , vol.37, no.8, pp.2895-2911, 2020 (SCI-Expanded)

Experimental and numerical determination of the thermal cycle performance of joints obtained with nanostructure-doped nanocomposite adhesives

Akpinar S., ÖZEL A.

COMPOSITES PART B-ENGINEERING , vol.174, 2019 (SCI-Expanded)

The fracture behaviour of nanostructure added adhesives under ambient temperature and thermal cyclic conditions

Kanar B., Akpinar S., Akpinar I. A., AKBULUT H., ÖZEL A.

THEORETICAL AND APPLIED FRACTURE MECHANICS , vol.97, pp.120-130, 2018 (SCI-Expanded)

An experimental study on composite adhesives reinforced with different types of organo-clays

Akpinar I. A., Gultekin K., Akpinar S., GÜRSES A., ÖZEL A.

JOURNAL OF ADHESION , vol.94, no.2, pp.124-142, 2018 (SCI-Expanded)

Investigation of mechanical and thermal properties of nanostructure-doped bulk nanocomposite adhesives

Akpinar I. A., GÜRSES A., Akpinar S., Gultekin K., AKBULUT H., ÖZEL A.

JOURNAL OF ADHESION , vol.94, no.11, pp.847-866, 2018 (SCI-Expanded)

Research on strength of nanocomposite adhesively bonded composite joints

AKPINAR I. A., Gültekin K., Akpinar S., AKBULUT H., ÖZEL A.

Composites Part B: Engineering , vol.126, pp.143-152, 2017 (SCI-Expanded)

Experimental analysis on the single -lap joints bonded by a nanocomposite adhesives which obtained by adding nanostructures

AKPINAR I. A., Gultekin K., Akpinar S., AKBULUT H., ÖZEL A.

COMPOSITES PART B-ENGINEERING , vol.110, pp.420-428, 2017 (SCI-Expanded)

Effects of unbalance on the adhesively bonded composites-aluminium joints

Gultekin K., Akpinar S., ÖZEL A., Oner G. A.

JOURNAL OF ADHESION , vol.93, no.9, pp.674-687, 2017 (SCI-Expanded)

The effects of graphene nanostructure reinforcement on the adhesive method and the graphene reinforcement ratio on the failure load in adhesively bonded joints

Gültekin K., Akpinar S., GÜRSES A., Eroglu Z., ÇAM S., AKBULUT H., et al.

Composites Part B: Engineering , vol.98, pp.362-369, 2016 (SCI-Expanded)

The effect of moment and flexural rigidity of adherend on the strength of adhesively bonded single lap joints

Gültekin K., Akpinar S., Özel A.

Journal of Adhesion , vol.91, no.8, pp.637-650, 2015 (SCI-Expanded)

A study on the strength of adhesively bonded joints with different adherends

Ozel A., Yazici B., Akpinar S., Aydin M. D., Temiz S.

COMPOSITES PART B-ENGINEERING , vol.62, pp.167-174, 2014 (SCI-Expanded)

The effect of the adherend width on the strength of adhesively bonded single-lap joint: Experimental and numerical analysis

Gultekin K., Akpinar S., Ozel A.

COMPOSITES PART B-ENGINEERING , vol.60, pp.736-745, 2014 (SCI-Expanded)

Effect of the Spew Fillet on Adhesively Bonded Single-Lap Joint Subjected to Tensile Loading: Experimental and 3-D Non-Linear Stress Analysis

Doru M. O., Ozel A., Akpinar S., Aydin M. D.

JOURNAL OF ADHESION , vol.90, no.3, pp.195-209, 2014 (SCI-Expanded)

The effect of the spew fillet on an adhesively bonded single-lap joint subjected to bending moment

Akpinar S., Doru M. O., Ozel A., Aydin M. D., Jahanpasand H. G.

COMPOSITES PART B-ENGINEERING , vol.55, pp.55-64, 2013 (SCI-Expanded)

Nonlinear stress analysis in adhesively bonded single-lap joint

Sayman O., Ozel A., Pasinli A., Ozen M.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY , vol.27, no.21, pp.2304-2314, 2013 (SCI-Expanded)

3-D non-linear stress analysis on the adhesively bonded T-joints with embedded supports

Akpinar S., Aydin M. D., Temiz S., Ozel A.

COMPOSITES PART B-ENGINEERING , vol.53, pp.314-323, 2013 (SCI-Expanded)

A non-linear elastic-plastic stress analysis in a ductile double-lap joint

Sayman O., Ozen M., Ozel A., Demir T., Korkmaz B.

SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS , vol.20, no.2, pp.163-168, 2013 (SCI-Expanded)

Effect of protrusion at the ends of bondline in single lap joints under tension and bending

Akpinar S., TEMİZ Ş., Aydin M. D., Ozel A.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY , vol.26, no.23, pp.2591-2602, 2012 (SCI-Expanded)

Determination of Mechanical Properties of Double-Strap Adhesive Joints with an Embedded Patch

Citil S., Temiz S., ALTUN H., Ozel A.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY , vol.25, no.18, pp.2555-2567, 2011 (SCI-Expanded)

Effect of curing pressure on the strength of adhesively bonded joints

AYDIN M. D., TEMIZ S., Oezel A.

JOURNAL OF ADHESION , vol.83, no.6, pp.553-571, 2007 (SCI-Expanded)

Elastoplastic stress analysis of thick laminated metal-matrix composite plates by the finite-element method

ALAR G., Oezel A., SEN S., KARAKUZU R.

MECHANICS OF COMPOSITE MATERIALS , vol.42, no.4, pp.373-384, 2006 (SCI-Expanded)

Articles Published in Other Journals

Experimental and numerical analysis of epoxy based adhesive failure on mono- and bi-material single lap joints under different displacement rates

Kahramanzade H., ÇAM S., ORHAN O., ÖZEL A.

Fracture and Structural Integrity , no.52, pp.9-24, 2020 (Scopus)

Çekmeye Maruz Ara Boşluklu Çift Takviyeli Yapıştırma Bağlantılarında Gerilme Analizi

ÇİTİL Ş., TEMİZ Ş., ÖZEL A.

EÜFBED - Fen Bilimleri Enstitüsü Dergisi , vol.5, no.2, pp.173-190, 2012 (Peer-Reviewed Journal)

Nemli Ortamlara Maruz Yapısal Yapıştırıcıların Dayanımı

TEMİZ Ş., AYDIN M. D., ALAR G., ÖZEL A.

Mühendis ve Makina , vol.49, no.585, pp.25-30, 2008 (Peer-Reviewed Journal)

İnce Cidarlı, Çapraz Takviyeli, Tabakalı Kompozit TüplerdeSonlu Elemanlar Yöntemi ile Burkulma Analizi

ALAR ÖNER G., TEMİZ Ş., AKBULUT H., ÖZEL A.

DEÜ Fen ve Mühendislik Dergisi , vol.9, no.1, pp.35-44, 2007 (Peer-Reviewed Journal)

Metrics

Publication

Citation (WoS)

607

H-Index (WoS)

Citation (Scopus)

775

H-Index (Scopus)

Project

Thesis Advisory

Open Access

UN Sustainable Development Goals

Publications & Works